Slat Wood Wall Panels

It’s a high-performance solution designed to enhance the sonic control of any space. This innovative product combines the natural aesthetic appeal of wood battens with the excellent sound-absorbing properties of polyester fibres. The integration of polyester fibers ensures excellent acoustic performance by effectively reducing echoes, reverberation and unwanted noise.
Polyester batten acoustic panels offer a variety of applications. It can be easily mounted on a wall, ceiling or any other flat surface, making it suitable for a wide range of environments including offices, recording studios, auditoriums, home theaters and restaurants.

Description

PET Slats PET Backing Acoustic Panel

Our PET Slats PET Backing Acoustic Panels have been carefully designed to effortlessly transform any space, enhancing the surroundings both visually and acoustically. The wood panels help to create an environment that is not only quiet but beautifully contemporary, soothing and relaxing.

The panels not only offer aesthetic refinement and superior acoustic dampening, but they are also produced using only environmentally friendly materials. All of the materials are sourced from certified sustainable sources— a complete environmentally friendly product.

Simply screw the panels straight into the wall, using the correct fixings, through the acoustic felt or if you are looking to increase the sound properties further, screwing them into batons. If installing on ceilings, the panels can be screwed straight into ceiling joists.

Our PET Slats Acoustic Panel can be used for creating beautiful slat walls and ceilings which adds a modern look to the room. The panel is sound dampening and removes reverberation within the room, which drastically improves the acoustics within the room.

Installation- Method One

1. You can easily install the PET Slats Acoustic Panel directly to the wall with screws (use a min 3.5mm x 32-42mm screw), each panel is installed with 15 screws. The screws will easily fit between the wooden slats, straight into the felt backing.

2. Cutting the panels is easily done with a fine jagged saw. The underlying acoustic felt is easily cut with a knife.

Installation- Method Two

1. Install 45mm (thickness) battens directly to your wall/ ceiling with a distance of 600mm.

2. Install the PET Slats Acoustic Panel directly on to the battens with screws (use a min 3.5mm x 32-42mm screw), each panel is installed with 15 screws. The screws will easily fit between the wooden slats, straight into the felt backing.

3. Cutting the panels is easily done with a fine jagged saw. The underlying acoustic felt is easily cut with a knife.

Installation- Method Three

1. Install 45mm (thickness) battens directly to your wall/ceiling with a distance of 600mm. 2.Place 45mm insulation between the studs.

3. Install the panels directly to the battens with screws (use a min 3.5mm x 32-42mm screw), each panel is installed with 15 screws. The screws will easily fit between the wooden slats, straight into the felt backing.

4. Cutting the panels is easily done with a fine jagged saw. The underlying acoustic felt is easily cut with a knife.